Driver for serial PCIs
|
You must be root to start this driver.
|
devc-serpci [vid=vid,did=did[,pci=pci]] [options] &
Neutrino
x86
- -b number
- The initial baud rate (default 57600).
- -C size
- The size of the canonical buffer in bytes (default 256).
- -c clock[/divisor]
- Define a custom clock rate, in hertz, and divisor for the serial port. The default (-c 1843200/16) is suitable for compatible PC serial ports.
- did=did
- The PCI device ID, in hexadecimal (0xXXXX).
- -E
- Set options to “raw” (default).
- -e
- Start in edited mode (default raw). Software flow control is enabled by default.
- -F
- Disable hardware flow control (default to hardware flow control enabled). Hardware flow control is not supported in edited mode.
- -f
- Enable hardware flow control (default). Hardware flow control is not supported in edited mode.
- -I number
- The size of the raw input buffer in bytes (default 2048).
- -O number
- (“Oh”) The size of the interrupt output buffer in bytes (default 2048).
- pci=pci
- The PCI index, in decimal (XX).
- -S|s
- Disable / enable software flow control. The default depends on the
mode: in raw mode (-E, the default), it's disabled;
in edited mode (-e), it's enabled.
The order in which you specify the -E or -e, and
-S or -s options matters:
Options
|
Mode
|
Software flow control
|
-e
|
Edited
|
Enabled
|
-S -e
|
Edited
|
Enabled
|
-e -S
|
Edited
|
Disabled
|
-E
|
Raw
|
Disabled
|
-s -E
|
Raw
|
Disabled
|
-E -s
|
Raw
|
Enabled
|
- -t number
- Enable the receive FIFO and set its threshold to 1, 4, 8, or 14 characters.
The default is 0 (trigger disabled).
- -u number
- Append number to the device name prefix
(/dev/ser). The default is 1; additional
devices are given increasing numbers.
- -v
- Increase verbosity.
- vid=vid
- The PCI vendor ID, in hexadecimal (0xXXXX).
The devc-serpci manager is a small serial device manager for QNX Neutrino. This driver supports 16Cxxx compatible Serial PCI cards.
|
The boards must use PCI I/O space for the registers, and the ports must be
contiguous in memory. |
devc-serusb