Graphics driver for ATI RADEON chipsets
io-display [-vf] -d vid=[0x]vendor_id,did=[0x]device_id[,deviceindex=index] [-c config_file] [-p priority]
Neutrino
x86, PowerPC
For the general io-display options that you can use with this driver, see io-display.
The devg-radeon.so driver provides accelerated 2D support for the specified graphics chipsets.
The DVI (digital video interface) is enabled by default, so you can connect LCD panels to your Radeon cards. The only requirement is that you connect the LCD to the DVI connector at boot time so the video BIOS can set up the digital output.
Dual-headed display is supported on cards with dual outputs (x86 only). The video BIOS initializes both outputs at boot time. Ensure that both outputs are connected.
|
Feature | Provision |
---|---|
Solid fills | Yes |
Pattern fills | Yes |
Onscreen blitting | Yes |
Offscreen blitting | Yes |
Chroma-keyed blitting | Yes |
Alpha blending | No |
Raster OPs | Full |
Bitmaps | No |
Feature | Provision |
---|---|
YUV formats | Yes (packed and planar) |
RGB formats | Yes (RGB 555, 565, 8888) |
Up scaling | Yes |
Down scaling | Yes |
Feature | Provision |
---|---|
Hardware Cursor | Yes |
TV Out | No |
Video capture | No |
DPMS (power saving) | Yes |
Display size (pixels): | Refresh rate (Hz): | Color depth (bits per pixel): |
---|---|---|
640x480 | 60, 70, 75, 85 | 8, 15, 16, 32 |
800x600 | 60, 70, 75, 85 | 8, 15, 16, 32 |
1024x768 | 60, 70, 75, 85 | 8, 15, 16, 32 |
1152x864 | 60, 70, 75, 85 | 8, 15, 16, 32 |
1280x800 | 60, 70, 75, 85 | 8, 15, 16, 32 |
1280x1024 | 60, 70, 75, 85 | 8, 15, 16, 32 |
1440x900 | 60, 70, 75, 85 | 8, 15, 16, 32 |
1600x1200 | 60, 70, 75, 85 | 8, 15, 16, 32 |
Restrictions:
This driver needs the following at run time: