netbsd hardware description

NetBSD netbsd.polarhome.com 6.1.3 NetBSD 6.1.3 (GENERIC) i386

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.3 (GENERIC)
total memory = 255 MB
avail memory = 238 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
innotek GmbH VirtualBox (1.2)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU           X5675  @ 3.07GHz, id 0x206c2
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId , AslId 
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (VGA, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
vga1 at pci0 dev 2 function 0: vendor 0x80ee product 0xbeef (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at ioapic0 pin 19
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 08:00:27:d4:14:2e
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x80ee product 0xcafe (miscellaneous system) at pci0 dev 4 function 0 not configured
auich0 at pci0 dev 5 function 0: i82801AA (ICH) AC-97 Audio
auich0: interrupting at ioapic0 pin 21
auich0: ac97: SigmaTel STAC9700 codec; no 3D stereo
auich0: ac97: ext id 0x809
ohci0 at pci0 dev 6 function 0: vendor 0x106b product 0x003f (rev. 0x00)
ohci0: interrupting at ioapic0 pin 22
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 0: vendor 0x8086 product 0x7113 (rev. 0x08)
piixpm0: interrupting at ioapic0 pin 23
iic0 at piixpm0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer1: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 46604 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
wd0 at atabus0 drive 0
wd0: 
wd0: drive supports 128-sector PIO transfers, LBA addressing
wd0: 8563 MB, 17397 cyl, 16 head, 63 sec, 512 bytes/sect x 17537024 sectors
uhub0 at usb0: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 12 ports with 12 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1
wd1: 
wd1: drive supports 128-sector PIO transfers, LBA addressing
wd1: 100 GB, 209865 cyl, 16 head, 63 sec, 512 bytes/sect x 211544064 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0:  cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2 at atabus1 drive 1
wd2: 
wd2: drive supports 128-sector PIO transfers, LBA addressing
wd2: 100 GB, 209865 cyl, 16 head, 63 sec, 512 bytes/sect x 211544064 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd2(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: VirtualBox USB Tablet, rev 1.10/1.00, addr 2, iclass 3/0
ums0 at uhidev0: 5 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
piixide0:1:1: lost interrupt
	type: ata tc_bcount: 16384 tc_skip: 0
piixide0:1:1: bus-master DMA error: missing interrupt, status=0x61
wd2e: DMA error writing fsbn 184396960 of 184396960-184396991 (wd2 bn 184396960; cn 182933 tn 7 sn 55), retrying
wd2: soft error (corrected)
piixide0:1:1: lost interrupt
	type: ata tc_bcount: 16384 tc_skip: 0
piixide0:1:1: bus-master DMA error: missing interrupt, status=0x61
wd2e: DMA error writing fsbn 210792288 of 210792288-210792319 (wd2 bn 210792288; cn 209119 tn 5 sn 21), retrying
wd2: soft error (corrected)

Filesystem         Size       Used      Avail %Cap Mounted on
/dev/wd0a          8.1G       2.9G       4.8G  37% /
/dev/wd2e           99G       2.2G        92G   2% /home
kernfs             1.0K       1.0K         0B 100% /kern
ptyfs              1.0K       1.0K         0B 100% /dev/pts
procfs             4.0K       4.0K         0B 100% /proc

load averages:  0.02,  0.02,  0.00;               up 48+21:58:02       13:02:26
40 processes: 39 sleeping, 1 on CPU
CPU states:  0.0% user,  0.0% nice,  0.0% system,  0.0% interrupt,  100% idle
Memory: 134M Act, 68M Inact, 52K Wired, 11M Exec, 166M File, 7664K Free
Swap: 129M Total, 129M Free



[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ] [man]
Polarhome, production since 1999.
Member of Polarhome portal.


Vote for polarhome
Free Shell Accounts :: the biggest list on the net