mkqnx6fs

Format a Power-Safe filesystem (QNX Neutrino)

---

You must be logged in as root to run this utility.

---

Syntax:

mkqnx6fs [-Bq] [-b blocksize] [-e endian] [-g groups]
         [-i inodes] [-n blocks] [-O options] [-o options]
         [-r percent] [-T type] [-u uuid] host

Runs on:

Neutrino

Options:

-B

Rewrite only the boot loader; don't touch anything in the filesystem (in particular don't reformat it). You would use this to upgrade to new boot loader code.

-b blocksize

Set the logical blocksize of the filesystem. Valid values are 512, 1024, 2048, or 4096; the default is 1024. Varying the blocksize can control various types of fragmentation as well as determine the maximum file size supported.

-e endian

Set the endian layout of the on-disk filesystem. Valid values are big or little; by default the filesystem uses the native endian-ness of the CPU.

-g groups

Set the number of allocation groups to subdivide the filesystem; by default a value (from 1 to 16) is selected based on filesystem size. An allocation group is a logical concept, not a physical segregation.

-i inodes

Set the maximum number of inodes in the filesystem. Each unique file or directory requires an inode.

-n blocks

Set the number of logical blocks in the filesystem. This is the total size of the filesystem, from which space is first allocated to the system bitmap and inodes files (so the number of user-accessible blocks will be slightly less than the specified value).

By default, mkqnx6fs makes the filesystem fully occupy the specified host (e.g. it determines the number of blocks from the size of the disk partition).

-O options

(“Oh”) Set(+) or unset(-) boot options:

• quiet — stop the boot loader from doing any output, disable the boot image selection menu, and silently boot the default image.
• cls — clear the screen first (in case the BIOS didn't do it earlier, and there isn't enough room for the menu).

The default is -O-quiet,-cls.

You can use this option with -B to just update the loader and options.

-o options

Set(+) or unset(-) filesystem options:

• lfncksum — enable a cksum algorithm on long filenames (longer than 27 characters), which greatly improves their lookup performance.

The default is -o+lfncksum.

---

This default is incompatible with the 6.4.0 version of the Power-Safe filesystem. If you wish to format a filesystem that can be mounted read-write by 6.4.0, you must specify -o-lfncksum; otherwise it will allow only read-only mounting.

---

-q

Operate quietly; don't prompt for confirmation and don't display the resulting configuration of the new filesystem. Without this option, mkqnx6fs will confirm that you meant to format if the host is a block-special device or is currently mounted.

-r percent

Set the percentage of the filesystem to reserve to prevent it from becoming completely full. In general, filesystem performace degrades when the disk is nearly full; this option just makes ENOSPC happen prematurely to stop this. The default is 3%.

-T type

Set the expected usage type of the filesystem; valid values are desktop, runtime, and media. This type is used to pick the appropriate blocksize, number of allocation groups, and number of inodes. It's a hint that's intended to replace explicit -b, -g, -i, and -r values.

-u uuid

Specify a 128-bit UUID for the filesystem, in the UUID “8-4-4-4-12” format. If you don't specify a UUID, mkqnx6fs generates a random, time-based (version 4 UUID) value.

host

The host of the new filesystem. You can specify this as a block-special device or partition (e.g. /dev/hd0t76), as a regular file, or as the root directory of a mounted fs-qnx6 filesystem (which will be resolved to the real host device).

Description:

The mkqnx6fs utility creates a fresh fs-qnx6 filesystem on the specified host (typically a hard disk partition, although you can create an image inside a regular file).

The integer fields of the filesystem are maintained as either all little-endian or all big-endian, as dictated by the -e option. Thus no CPU architecture pays a byte-swapping penalty for local disks. The filesystem detects the endian-ness and swaps if necessary, so you can move a disk across platforms (with a slight penalty in performance).

Summary of filesystem commands

The following table shows the shared objects and related commands for the filesystems:

^a Read-only.

^b Not usually necessary.

For more information, see the Filesystems chapter of the System Architecture guide.

Examples:

# mkqnx6fs /dev/hd0t76
All files on /dev/hd0t76 will be lost!
Confirm filesystem re-format (y) or (n): y
Format fs-qnx6: 8040524 blocks, 62816 inodes, 8 groups

Exit status:

0

The filesystem was formatted successfully.

1

An error occurred (a descriptive message is written to stderr).

See also:

chkqnx6fs, devb-*, dinit, fs-qnx6.so, mkdosfs

“Power-Safe filesystem” in the Filesystems chapter of the System Architecture guide

“Power-Safe filesystem” in the Filesystems chapter of the Neutrino User's Guide